Aller au contenu principal
Aide

Message d'origine par : yeungw ,

Texte:

I fixed the MagSafe charger no light no power issue. (I cleaned the plug and reset SMC before.)

1. Unplug the power adapter from power source.

2. Waiting for 1 minutes.

3. Uninstall the fuse from power adapter (check it is work or not)

4. Install the fuse into power adapter.

5. Using power meter, set it to "10k Ohm".

6. Use red line connect to first point. black line connect to second point. Until you got data.

7. Use red line connect to first point. black line connect to center point. Until you got data.

8. Use red line connect to first point. black line connect to fourth point. Until you got data.

9. Use red line connect to first point. black line connect to fifth point. Until you got data.

10. Please plug to power source and your mac again. It will have light and power.

Statut:

open