Aller au contenu principal
Aide

Version actuelle par : oldturkey03 (détails du vote) ,

Titre:

Difficulty in re-installing Antenna Plate

Texte:

Thanks to the [[guide|3113]|hard drive replacement guide, I managed to replace the hard drive with Intel X25-M 80g SSD and it works great!

However, I encountered difficulty in re-installing the Antenna Plate, particularly the two 5.0mm T8 Torx on both sides. While it was originally perfectly fit (when I tried to remove the antenna plate), it is now re-installed with only one side of the T8 torx on either one side and the two 6.6mm T8 screws in the bottom part, leaving one 5.0mm screw uninstalled. Though my mac mini worked perfectly fine without that screw.

I don't think I have damaged or transformed the antenna plate and I believe that the antenna plate was not perfectly fit out of the box. Do anyone of you encounter this problem? Any solution?

Appareil:

-Unibody Mac Mini
+Mac Mini Unibody

Statut:

open

Réponse acceptée:

+22621

Modifié par : iRobot ,

Titre:

Difficulty in re-installing Antenna Plate

Texte:

Thanks to the [[guide|3113]|hard drive replacement guide, I managed to replace the hard drive with Intel X25-M 80g SSD and it works great!

However, I encountered difficulty in re-installing the Antenna Plate, particularly the two 5.0mm T8 Torx on both sides. While it was originally perfectly fit (when I tried to remove the antenna plate), it is now re-installed with only one side of the T8 torx on either one side and the two 6.6mm T8 screws in the bottom part, leaving one 5.0mm screw uninstalled. Though my mac mini worked perfectly fine without that screw.

I don't think I have damaged or transformed the antenna plate and I believe that the antenna plate was not perfectly fit out of the box. Do anyone of you encounter this problem? Any solution?

Appareil:

-Mac mini Model A1347
+Unibody Mac Mini

Statut:

open

Modifié par : iRobot ,

Titre:

Difficulty in re-installing Antenna Plate

Texte:

Thanks to the [[guide|3113]|hard drive replacement guide, I managed to replace the hard drive with Intel X25-M 80g SSD and it works great!

However, I encountered difficulty in re-installing the Antenna Plate, particularly the two 5.0mm T8 Torx on both sides. While it was originally perfectly fit (when I tried to remove the antenna plate), it is now re-installed with only one side of the T8 torx on either one side and the two 6.6mm T8 screws in the bottom part, leaving one 5.0mm screw uninstalled. Though my mac mini worked perfectly fine without that screw.

I don't think I have damaged or transformed the antenna plate and I believe that the antenna plate was not perfectly fit out of the box. Do anyone of you encounter this problem? Any solution?

Appareil:

Mac mini Model A1347

Statut:

open

Contribution d'origine par : Ray Lee ,

Titre:

Difficulty in re-installing Antenna Plate

Texte:

Thanks to the [[guide|3113]|hard drive replacement guide, I managed to replace the hard drive with Intel X25-M 80g SSD and it works great!

However, I encountered difficulty in re-installing the Antenna Plate, particularly the two 5.0mm T8 Torx on both sides. While it was originally perfectly fit (when I tried to remove the antenna plate), it is now re-installed with only one side of the T8 torx on either one side and the two 6.6mm T8 screws in the bottom part, leaving one 5.0mm screw uninstalled. Though my mac mini worked perfectly fine without that screw.

I don't think I have damaged or transformed the antenna plate and I believe that the antenna plate was not perfectly fit out of the box. Do anyone of you encounter this problem? Any solution?

Appareil:

Mac mini Model A1347

Statut:

open