Aller au contenu principal
Aide

Version actuelle par : Ged ,

Texte:

Some pre cut adhesive is poorly made.
-Try find a good supplier for it, I've used replacebasefkr ore cut adhesive before on the Xperia Z series, and always got a flush fit, make sure you completely clear the old adhesive, using 99.9% isopropyl alcohol to clean the frame of any excess adhesive, dirt and grease.
+Try find a good supplier for it, I've used replacebase for pre cut adhesive before on the Xperia Z series, and always got a flush fit, make sure you completely clear the old adhesive, using 99.9% isopropyl alcohol to clean the frame of any excess adhesive, dirt and grease.
After that, make sure you line up the adhesive correctly, once you put the screen in, heat it up around the sides, and use clamps to secure it, this will give you a very strong adhesion and flush fit. :-)

Statut:

open

Contribution d'origine par : Ged ,

Texte:

Some pre cut adhesive is poorly made.

Try find a good supplier for it, I've used replacebasefkr ore cut adhesive before on the Xperia Z series, and always got a flush fit, make sure you completely clear the old adhesive, using 99.9% isopropyl alcohol to clean the frame of any excess adhesive, dirt and grease.

After that, make sure you line up the adhesive correctly, once you put the screen in, heat it up around the sides, and use clamps to secure it, this will give you a very strong adhesion and flush fit. :-)

Statut:

open