Aller au contenu principal
Aide

Message d'origine par : Bob Wettermann ,

Texte:

One of our clients asked us to build them a solution for the Galaxy S3 USB repair. This method uses solder paste, a stencil and a micro squeegee to get the device down. You may also need, depending on your eyesight some type of magnification. Finally you will need a heating source.

You will either need to have some advanced soldering skills and lots of patience OR you can, if you are  some what patient and have very little experience, use this method:

https://www.youtube.com/watch?v=nDwGeHjQXe8

Let me know what you think once you try it.

Statut:

open