Aller au contenu principal
Aide

Message d'origine par : Scott Van Ausdoll ,

Texte:

The pots (potentiometers) are dirty.

1. Get a can of deox it or other electronics cleaner.

2. Unplug amp!

3. Get inside of amp and check on the back side of pots. If there is a small hole

spray some cleaner in there and rotate knob back and forth frpm 0 -10 several times.

If there is no hole, Remove knobs and spray down the shaft in the front give it a minute to get down in there then rotate knob several times. do this to every pot.

4. Put back together and Jam

Statut:

open