Aller au contenu principal
Aide

Contribution d'origine par : L Pfaff ,

Texte:

Luke cut the old trap out as close to the trap as possible (leave pipe as long as possible sticking out of stack) so you can use a rubber joiner with gear clamps to reattach new trap. If need be you can also cut the brass pipe and use a second joiner on that connection on new trap. All parts required can be found at hardware store, Home depot, Lowes, etc. Take the pic's with you to the plumbing dept. and the staff should be able to set you up with all supplies you need.  Links below show how joiner/fernco can be used to simplify pluming in new trap. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

https://www.google.ca/search?q=fernco+on+tub+drain&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjPnoaizpXQAhWk64MKHf4iD6YQ_AUICCgB&biw=1024&bih=681#tbm=isch&q=fernco+on+tub+trap

http://www.homedepot.com/b/Plumbing-Pipes-Fittings/Fernco/N-5yc1vZbqpfZ4hs

Statut:

open