Aller au contenu principal
Aide

Message d'origine par : douglasw ,

Texte:

For the 2009 Mac Pro Firmware update, you need to disable System Integrity Protection first. Here's a quick data dump--I'm about to do this myself.

As you may know, some Mac Pro models have been introduced that are identical or very nearly identical to the model that preceded them. Such is the case with the 2007 Mac Pro (MacPro2,1) and the 2010 Mac Pro (MacPro5,1). I decided to see if it was possible to come up with a way to update the firmware on the 2009 Mac Pro with the firmware from the 2010 Mac Pro. The hardware of these models is very close. The only thing that differs is the CPU socket mechanism on the dual CPU model, which uses Xeon CPUs with the IHS (Integrated Heat Spreader) removed, and the SMC firmware version. The CPU socket issue is transparent to the firmware, and the SMC firmware difference between 2009 and 2010 models is not an issue. As long as the SMC firmware version matches between the main board and the CPU board, everything works perfectly.

To explain how this was accomplished, let me first describe how the firmware update process works on a Mac. The firmware updater package, after checking that the Mac can use the update, places an EFI boot file named EFIUpdaterApp2.efi, which is very similar in structure to the standard boot file that starts a Mac on the system volume, in the /System/Library/Core Services/Firmware Updates folder, along with the actual firmware image. This boot file is then blessed in a special way, and the next time the Mac is booted from shutdown, with the power button held down for a few seconds, this special EFI program is run.

So how do we get the program to load the other firmware? It turns out that it is surprisingly easy. Inside the EfiUpdaterApp2.efi program are a list of firmware version strings from different releases of the 2010 Mac Pro, along with the CRC32 checksum of the firmware image file. If one of the firmware version strings is modified to what the 2009 Mac Pro model is, and the CRC32 checksum is changed to match the 2010 Mac Pro firmware image, and the firmware image filename is changed to the 2009 Mac Pro firmware image filename, then all is well.

I have tested this myself, on both 2009 and 2010 Mac Pro models. You can upgrade or downgrade at will. If you have a CPU in a 2010 Mac Pro that isn't supported in the 2009 Mac Pro, such as the Westmere 6-core Xeon, the system will not boot after the update until a compatible CPU is installed. I started off with just a few scripts and files in a folder to do this, but as a service to the community, I have written an installer program that does everything automatically. The program checks the Mac Pro model and will install the 2009 Mac Pro firmware or the 2010 Mac Pro firmware, whichever is appropriate. If you have a 2010 Mac Pro with a 6-core Xeon, the program will warn you, but still allow the firmware update. The download does not contain any firmware updater files or image files. The program creates a small RAM disk, downloads the needed files, copies all of the scripts to the RAM disk, and then runs the scripts. Everything is left on the RAM disk for you to look and and study, if needed.

I hope you enjoy this utility, and enjoy the benefits of extending the value of your Mac Pro.I have a fairly non-standard configuration, but it turned out that all I needed to do was disable SIP in OS X 10.11 to get it to work.

In El Capitan, Apple has enabled System Integrity Protection. You need to disable it in order to update the firmware. Here you go...

Download:

1. Download Mac Pro 2009-2010 Firmware tool

2. Download firmware for Mac Pro 5.1 (MacProEFIUpdate.dmg)

Disable System Integrity Protection:

3. Restart your 2009 Mac Pro holding Command + R (you will restart into Recovery Mode)

4. In Recovery mode, click on "Utilities" and select Terminal

5. In Terminal, type csrutil disable

6. Press Return

7. Restart Mac Pro

Run Updater:

8. Once restarted, Double click (mount) MacProEFIUpdate.dmg

9. Once it is mounted on desktop, Run Mac Pro 2009-2010 Firmware tool

10. Shut down Mac pro.

11. Once shut down, hold the Power Button until you hear a tone, and let go.

Your computer will now upgrade firmware.

Last steps..

Enable System Integrity Protection:

12. Restart your 2009 Mac Pro holding Command + R (you will restart into Recovery Mode)

13. In Recovery mode, click on "Utilities" and select Terminal

14. In Terminal, type csrutil enable

15. Press Return

16. Restart Mac Pro

Done!!

I had another look at the problem I was having. The fix is even simpler than described earlier.

Download the Mac Pro Firmware update 1.5 (MacProEFIUpdate.dmg) from Apple: http://support.apple.com/kb/DL1321

With the downloaded .dmg on the desktop, double click to reveal the package.

Now run the Mac Pro 2009-2010 Firmware Tool.

There is no need to rename or replace anything. The Firmware Tool grabs the package and does its magic with no 5570 error message.

Why we now need to manually download the firmware is another question.

Thank you so much...I did the firmware upgrade so many times without issues, then "error 5570"...I tried for 3 hours, from replacing the memory,

CPU, Video Card, dual processor to single processor, I should have just read your post.

I have a Sapphire HD 7950 3GB GDDR5 Mac Edition Graphics Card. I swapped that for the original card, and it made no difference.

I also have a OWC Mercury Accelsior PCIe SSD. I didn't remove that, but I did try upgrading the firmware from a 10.11 install on a drive on the built in SATA bus and that didn't work either.

In the end I was able to upgrade the firmware to 5,1 from the OWC Mercury Accelsior PCIe SSD, with the Sapphire card installed, simply by going into recovery mode and disabling SIP.

I hope this info helps someone.

Turning Off Rootless System Integrity Protection in Mac OS X

Again, the vast majority of Mac users should not disable rootless. Disabling rootless is aimed exclusively at advanced Mac users. Do so at your own risk, this is not specifically recommended.

1    Reboot the Mac and hold down Command + R keys simultaneously after you hear the startup chime, this will boot OS X into Recovery Mode

2    When the “OS X Utilities” screen appears, pull down the ‘Utilities’ menu at the top of the screen instead, and choose “Terminal”

3    Type the following command into the terminal then hit return:

4    csrutil disable; reboot


5    You’ll see a message saying that System Integrity Protection has been disabled and the Mac needs to restart for changes to take effect, and the Mac will then reboot itself automatically, just let it boot up as normal

You can also issue the command by itself without the automatic reboot like so:

csrutil disable

If you plan on doing something else in the Terminal or OS X Utilities screen you may want to leave off the auto-reboot command at the end, and yes, in case you were wondering, this is the same recovery mode used to reinstall OS X with Internet Recovery.

Once the Mac boots up again, System Integrity Protection will be disabled entirely in Mac OS X.

Checking the Status of Rootless / System Integrity Protection in Mac OS X

If you want to know the status of rootless before rebooting or without rebooting the Mac into recovery mode, just issue the following command into the Terminal:

csrutil status

You’ll either see one of two messages, enabled indi:

$ csrutil status

System Integrity Protection status: enabled.

or

$ csrutil status

System Integrity Protection status: disabled

If at any time you wish to change the status of rootless, another reboot into Recovery Mode is required.

How to Re-Enable Rootless System Integrity Protection in Mac OS X

Simply reboot the Mac again into Recovery Mode as directed above, but at the command line use the following syntax instead:

csrutil enable

Just as before, a reboot of the Mac is required for changes to take effect.

As previously stated, the vast majority of Mac users should leave rootless enabled and embrace System Integrity Protection

Actually I found the solution on Netkas.org. The site was down for a good portion of today and I wasn't abel to search their archives.

Apparently all you have to do is this:

Download the Mac Pro Firmware update 1.5 (MacProEFIUpdate.dmg) from Apple: http://support.apple.com/kb/DL1321

With the downloaded .dmg on the desktop, double click to mount the image.

Run the Mac Pro 2009-2010 Firmware Tool. It will automatically locate the package and proceed to the next phase of reboot and power switch hold until the little light above the power button begins to flash or you hear a long beep.

There is no need to rename or replace anything. The Firmware Tool grabs the package and proceeds with the process with no 5570 error message.

Hope this helps other Mac Pro 2009 users who are attempting this firmware update.

#10

After disassembly I could see that the previous unlidded CPUs had allowed the copper heatsinks to rest directly in contact with the standoffs.   So I measured the thickness of the unlidded E5520 and lidded X5690 and found a 2.2mm height difference, which I accommodated with 2 washers plus foil shims to make up the exact height.   Used thin "asterisk" pattern of NT-H1 on the CPUs and built up 3mm thermal pad on each heatsink.  Clipped the fan connector tabs and seated them fully in their sockets before beginning to screw down the heatsinks.   Tightened down each screw in the recommended pattern and got about 3.5 turns until "finger tight" and heat sink was just meeting the washers, and went no further.  Confirmed visually that the NT-H1 had spread to all edges of the IHS on each CPU.

Installed one CPU at a time and got a boot chime + no diagnostics LEDs on the first try each CPU.  After A CPU install, had successful boot but full fan after about 90 seconds as reported elsewhere (on Macrumors (http://forums.macrumors.com/showpost.php?p=13796503&postcount=296)).  Normal fan operation now after completing the B CPU install.

With the case open, I see idle CPU A/B temps at 36/29C and peak temps of 48/41C during a single Geekbench pass, with the Northbridge running at about 58C irrespective of load.   No fans ramp up during the single-pass test.

Now to start running a 24-hr stress test and we'll see how it holds up!

Quote from: fabriciom on May 10, 2011, 01:35:40 PM

Can anyone confirm you can go back to your 2009 EFI?

Yep, I've had no problems going back to the 2009 EFI. It reverts to my original MP41.0081.B07 firmware, just something you need to be aware of in case you have one of those special refurb Mac Pros with the MP41.0081.B08 firmware.

It looks like you've covered almost all of the solutions. Did you rename the update to "EFI2010.dmg" and then mount it before running the firmware update tool? While using Mavericks of course, not El Capitan.

I know some say you don't have to rename it, but others do, so it's worth a try.

It is... Unless the Apple 5.1 firmware update is open on the desktop. A combination of issues led to all the trouble. I pulled the SSD hard drive running OS 10.11.3 from the PCI slot and booted 10.7.5 from a SATA hard drive. Disconnected from the 5770 GPU and connected to the old GT120. Loaded the 4.1-5.1 tool with Apple's 5.1 firmware update open on the desktop. That worked. At this point, I don't know why the GPU or PCI SSD would interfere but, all I know is that it only worked when they were out of the equation. I reset the pram and all is great. The 1333 ram shows as 1066 but, only because the new CPU isn't installed yet.

Statut:

open