Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Aide

Version actuelle par : Steven ,

Texte:

Hola Robert, ¿cómo estás?, I'm from Colombia and I hope your okay, first of all happy new Solar Cycle.
 
I had exactly the same issue with my guitar controller for Playstation 3, and I say I had becase fortunately I could fix it yesterday.
 
It's really annoying to play with that kind of trouble and I just did the following and it was completely fixed, after looking for a lot the issue, I first thought it was caused for the red fret button and it wasn't. I've attached a picture where I mark with red circles the place where surely you have the problem. What I did here was to check the connection between the cables and the PCB (the board) and effectively the cable of the red fret hadn't a good connection with the board so I cut the first 5 or 8 milimeters of the cable and soldered again.
 
As I told you before, I had exactly the same trouble as you and I could fix it in this way, II'm sure your issue is the same, so try this solution and tell me.
As I told you before, I had exactly the same trouble as you and I could fix it in this way, II'm sure your issue is the same, so try this solution and tell me.
 
[image|998967]

Statut:

open

Contribution d'origine par : Steven ,

Texte:

Hola Robert, ¿cómo estás?, I'm from Colombia and I hope your okay, first of all happy new Solar Cycle.

I had exactly the same issue with my guitar controller for Playstation 3,  and I say I had becase fortunately I could fix it yesterday.

It's really annoying to play with that kind of trouble and I just did the following and it was completely fixed, after looking for a lot the issue, I first thought it was caused  for the red fret button and it wasn't. I've attached a picture where I mark with red circles the place where surely you have the problem. What I did here was to check the connection between the cables and the PCB (the board) and effectively the cable of the red fret hadn't a good connection with the board so I cut the first 5 or 8 milimeters of the cable and soldered again.

As I told you before, I had exactly the same trouble as you and I could fix it in this way, I sure your issue is the same, so try this solution and tell me.

[image|998967]

Statut:

open