Aller au contenu principal
Aide

Version actuelle par : Christopher South ,

Titre:

Front panel and Click wheel board replacement

Texte:

I have a new front housing without the click wheel board. How do I remove the board from the front panel and then re-attatch to the new front housing. Is it glued and what type of glue for the re-install. Do I have to use a rework station heat blower to soften the old glue, and if so what temperature do you recommend?

Thanks

Appareil:

iPod 3rd Generation

Statut:

open

Réponse acceptée:

432959

Modifié par : Christopher South ,

Titre:

Front panel and Click wheel board replacement

Texte:

I have a new front housing without the click wheel board. How do I remove the board from the front panel and then re-attatch to the new front housing. Is it glued and what type of glue for the re-install. Do I have to use a rework station heat blower to soften the old glue, and if so what temperature do you recommend?

Thanks

Appareil:

iPod 3rd Generation

Statut:

open

Réponse acceptée:

432959

Message d'origine par : Christopher South ,

Titre:

Front panel and Click wheel board replacement

Texte:

I have a new front housing without the click wheel board. How do I remove the board from the front panel and then re-attatch to the new front housing. Is it glued and what type of glue for the re-install. Do I have to use a rework station heat blower to soften the old glue, and if so what temperature do you recommend?

Thanks

Appareil:

iPod 3rd Generation

Statut:

open