Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Aide

Version actuelle par : Minho (détails du vote) ,

Texte:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Statut:

deletedopen
deletedopen

Modifié par : Minho (détails du vote) ,

Texte:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Statut:

opendeleted
opendeleted

Modifié par : Minho (détails du vote) ,

Texte:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Statut:

deletedopen
deletedopen

Modifié par : Minho ,

Texte:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. [https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that.  Don't start soldering on the board until you have properly checked everything else.

Statut:

opendeleted
opendeleted

Modifié par : oldturkey03 ,

Texte:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer. Replacing that will resolve your issue. Don't[https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that. Don't start soldering on the boardsboard until you have properly checked everything else.
Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer. Replacing that will resolve your issue. Don't[https://www.youtube.com/watch?v=LdnMquPql-Y|This video] should help you with that. Don't start soldering on the boardsboard until you have properly checked everything else.

Statut:

open

Contribution d'origine par : oldturkey03 ,

Texte:

Jack Nicolsen you cannot make the determination without working on it. The number one give away on here is this "dropped initially about 10 hours ago" and " the left side of the screen had a tiny crack" You have a failed digitizer.  Replacing that will resolve your issue. Don't start soldering on the boards until you have properly checked everything else.

Statut:

open