Réparez vos affaires Communauté Boutique
Aide

Version actuelle par : Eric Huang

Titre:

Just about the SCREWS... (PC1304)

Texte:

I've unscrewed the outside case of my PowerShot and can't find out which screw should be in their original place... There was too many types of screws and even different threads for the same length...
-p.s. My camera model is PC1304.
+p.s. My camera model is PC1304.
=== Update (10/21/2017) ===
-These parts are the one I've unscrewed.
+These parts are the one I've unscrewed.
+
[image|1217239]

Appareil:

Canon PowerShot SX1 IS

Statut:

open

Réponse acceptée:

+435263

Modifié par : Eric Huang

Titre:

Just about the SCREWS... (PC1304)

Texte:

I've unscrewed the outside case of my PowerShot and can't find out which screw should be in their original place... There was too many types of screws and even different threads for the same length...
-p.s. My camera model is PC1304.
+p.s. My camera model is PC1304.
+
+=== Update (10/21/2017) ===
+
+These parts are the one I've unscrewed.
+[image|1217239]

Appareil:

Canon PowerShot SX1 IS

Statut:

open

Contribution d'origine par : Eric Huang

Titre:

Just about the SCREWS... (PC1304)

Texte:

I've unscrewed the outside case of my PowerShot and can't find out which screw should be in their original place... There was too many types of screws and even different threads for the same length...

p.s. My camera model is PC1304.

Appareil:

Canon PowerShot SX1 IS

Statut:

open