Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Aide

Contribution d'origine par : Michael C ,

Texte:

Hi bryant,

After pluging the digitizers cable in and wiping the lcd and inside of the digitizer, just place it down gently ontop and as long as all the clips are not bent then just slowly apply even pressure down upod the edges, keep doing this working your way along the edges and eventually you will start to here clicks, this is good. If however you apply to much pressure in one place and click that side in there is a chance that the screen will crack again (this happend to me). so nice even pressure. :)

hope this helps.

Mic

Statut:

open