Aller au contenu principal
Aide

Version actuelle par : TheYootz Media Group ,

Texte:

You could try to solder the leds to a ribbon cable that could take power from the battery, like other mods for the iPhones, if you had a cable like so from a broken mod kit.
+
+=== Update (03/05/2019) ===
+Run a jumper wire from the logo to PPLED_OUT_A that drives 20volts to the LEDs should work.

Statut:

open

Contribution d'origine par : TheYootz Media Group ,

Texte:

You could try to solder the leds to a ribbon cable that could take power from the battery, like other mods for the iPhones, if you had a cable like so from a broken mod kit.

Statut:

open