Aller au contenu principal
Aide

Version actuelle par : Prestmig ,

Texte:

-I had done extensive searching before posting this but I ended up finding the solution. It is under the chosen solution.
+I thought I found the solution but it was for a unibody MBP. So I removed the link but I did find a solution on my own. Just to let you all know, this is no means a proper fix.
-[post|184748]
+
+
+# Dissassemble top assembly from frame.
+# “Scrape" off the rubber gasket.
+# Get your new rubber gasket and cut off the part that is suppose to lay under the screen.
+# Test fit the new rubber gasket.
+# Use double sided adhesive to attach the bottom part of the gasket onto the assembly.
+# Use a bit of super glue then work your way around the sides and top.
+# Reassemble.
+I don't even recommend to do this at all to anybody. But I did it because my rubber gasket was damaged and was starting to fall apart. I don't know how long it will last. Could work for a while or it could fall out soon.

Statut:

open

Contribution d'origine par : Prestmig ,

Texte:

I had done extensive searching before posting this but I ended up finding the solution. It is under the chosen solution.

[post|184748]

Statut:

open