Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Aide

Version actuelle par : Julien-Pierre ,

Texte:

Hi there!
 
So I had the same problem, as well. There is a piece which broke on the gearing of the frame base-paper block, and the wheel which pull the paper doesn’t turn anymore (well it turn 1 for 3 tries, then 1 for 10 tries, then never again).
 
The printer shows a jam error message, but it’s not a jam (I guess the printer is just doing a basic test: it detects paper in the tray, it engages the paper tray motor, and then it doesn’t detect paper on the next floor => paper jam). It’s not a grab problem either (cleaning the wheel doesn’t fix the problem).
 
I contacted a repairer, and he told me that he is seeing a lot of these problems currently. But the reparation is more expensive than the printer itself (labor), so I decided to try myself, using this post.
 
I bought the piece (JC93-00547A):
 
* https://www.mk-electronic.de/eng/items/show/JC93-00547A
* https://www.s2i33.com/kit-de-maintenance/13781-ensemble-prise-papier-samsung-clp-360-clx-3305-jc93-00547a.html
* …

I
I followed the video pointed by Abel: https://www.youtube.com/watch?v=Th_zO-9ACrU

It’s
- It’s not perfect, but it was essential.

I
I followed the video pointed by Abel: https://www.youtube.com/watch?v=Th_zO-9ACrU

It’s
- It’s not perfect, but it was essential.
 
It’s less hard than I thought it would be when I watched the first time (my idea was that I would probably definitively kill my printer if I try to repair it, but it was not working anymore anyway, so…). It took me ~1 hour to complete the repair (disassemble, replace, reassemble), I’m not a very good handyman.
 
And… it works! I really thought I would break it, but no, the problem is completely fixed! :)
 
Thanks everyone, and for those who have the problem and hesitate: just try!

Statut:

open

Contribution d'origine par : Julien-Pierre ,

Texte:

Hi there!

So I had the same problem, as well. There is a piece which broke on the gearing of the frame base-paper block, and the wheel which pull the paper doesn’t turn anymore (well it turn 1 for 3 tries, then 1 for 10 tries, then never again).

The printer shows a jam error message, but it’s not a jam (I guess the printer is just doing a basic test: it detects paper in the tray, it engages the paper tray motor, and then it doesn’t detect paper on the next floor => paper jam). It’s not a grab problem either (cleaning the wheel doesn’t fix the problem).

I contacted a repairer, and he told me that he is seeing a lot of these problems currently. But the reparation is more expensive than the printer itself (labor), so I decided to try myself, using this post.

I bought the piece (JC93-00547A):

* https://www.mk-electronic.de/eng/items/show/JC93-00547A
* https://www.s2i33.com/kit-de-maintenance/13781-ensemble-prise-papier-samsung-clp-360-clx-3305-jc93-00547a.html
* …

I followed the video pointed by Abel: https://www.youtube.com/watch?v=Th_zO-9ACrU

It’s not perfect, but it was essential.

It’s less hard than I thought it would be when I watched the first time (my idea was that I would probably definitively kill my printer if I try to repair it, but it was not working anymore anyway, so…). It took me ~1 hour to complete the repair (disassemble, replace, reassemble), I’m not a very good handyman.

And… it works! I really thought I would break it, but no, the problem is completely fixed! :)

Thanks everyone, and for those who have the problem and hesitate: just try!

Statut:

open