Aller au contenu principal
Aide

Message d'origine par : Lamoid ,

Texte:

Those *@&! screws were nearly impossible to remove.  I was finally able to get them out by (1) placing the device screen-down on a hard work surface, (2) fitting a metal phillips head screwdriver of the correct, tiny size into a screw, and (3) hitting the end of the screw driver soundly 3 times with a pair of pliers.  Then (4) I held the screw driver firmly in the screw with signifigant downward force and turned the device clockwise while not allowing the screwdriver itself to turn.  Before I discovered that procedure I trashed two screwdrivers and messed up the screw heads pretty badly. Nevertheless it worked.  I have not yet tried to put them back in.

Statut:

open