Aller au contenu principal

Réparez vos affaires

Droit à la réparation



Contribution d'origine par : mayer ,


Look like you have one 110 volt leg hot and the other not.  Your dryer should be on a sepayart double pole throw break with nothing else connected to it.

'''Control displaying F31:'''

An L2 (Low or No Line Voltage) Error code indicates that there may be a problem with your home power supply, keeping the dryer's heater from turning on.

==== Try the following: ====

* Check to see if a household fuse has blown or circuit breaker has tripped. Electric dryers use two household fuses or breakers. Replace the dryer fuse(s) or turn off the household circuit breaker for the dryer for one (1) minute, to reset the circuit breaker, then turn on the circuit breaker.
* Confirm that the power cord is properly installed. Refer to the Installation Instructions for details.
* Start a time dry cycle.
* Monitor the dryer for one (1) minute to ensure the error code does not display again.