Aller au contenu principal
Aide

Message d'origine par : quipeut ,

Texte:

I also broke one of the digitizer cable retaining flaps while replacing my iPad's LCD.  After making sure that there were no pieces of the broken clip remaining, I tried just sliding the digitizer cable into it's housing slot, leaving it unclipped, and hoping for the best.

I was pleasantly surprised to find that the touch screen was accurately responsive about 95% of the time, with only intermittent registration of phantom touching.  Of course, while that's better than I'd expected, it's far from ideal.

So I went back in, and used a small piece of polyimide tape in place of the clip, and haven't had any problems since.  Of course, this was just a little while ago.  Still waiting to see how long-term a fix this is.  Worst case scenario, I suppose I could do a little light soldering.

Statut:

open