Aller au contenu principal
Aide

Contribution d'origine par : oldturkey03 ,

Texte:

'''++@lucchini++'''  open your console up and reflow the solder joints on all the controller port pins.  It is easily possible that this is caused by some cold solder joints etc. just given the age of the console. It should be pretty identical to the Sega Genisis II [guide|42702]

Post some GOOD picture of what you encounter once you have your console opened up, with your QUESTION. It will help if we can see what you see.

[guide|21499]

Statut:

open