Aller au contenu principal
Aide

Contribution d'origine par : Abrsvc ,

Texte:

The pressure inside the home is usually in the range of 50PSI.  Based upon your description, you are correct that the source of the leak is likely to be the rubber grommets and not the valve itself.  You are exceeding the  plumbing code which limits the pressure to 80.PSI  This should be addressed asap.  You can try the adjustment screw on the PRV itself to see if it can be released.  I believe that once the PRV is replaced, your problem will also go away.

Dan

Statut:

open