Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Aide

Contribution d'origine par : Daniel Hoag ,

Texte:

I used a $3 soldering iron from O'reilly auto and successfuly did this by leaving it plugged in for 5 minutes and used capper solder wick to remove the old solder and taped it in place with a piece of scotch tape. after I sprayed it with flux and put a little dab of solder on each point waiting 20 seconds btween solders. I did it though. No blobs crossed voer and crossbridged and the reassembly was a success. If anyone is changing the back out on a touch 4, you will need to do this nomatter what. There is absolutely no way to peel the strip without breaking it. I use super glue to glue it and it works great

Statut:

open