Aller au contenu principal
Aide

Message d'origine par : oldturkey03 ,

Texte:

Mike, I would start of by following [http://www.ifixit.com/Wiki/Electronics_Water_Damage|this guide.] It will help to prevent corrosion damage and failure later on. then replace the battery. you can re-evaluate after that and if you still should not have any backlight, it will be time to replace the LCD. On the flip side of that, it is also possible that you shortened out the backlight IC on the logic board. It is fixable as well,but not quite as easy. Hope it will work for you good luck.

Statut:

open