== If it doesn't fit ==
you could'' have the wrong screws.'' The correct diameter and length are required. If you can not align the plate with the case you're replacing it incorrectly. You must '''first reconnect the antenna to the board, '''then tilting the plate from the front position it. Check that other parts are not blocking the three holes. Try inserting a toothpick into the holes to check for obstructions before placing the plate. You may have stripped the screw holes, in that case a drop of lock-tight on the screws may fill the gaps enough to secure (you're not holding Elephants), you just want to secure the plate so that it won't short out. The bottom will help keep it in place once you get it on.
''If this answer was helpful please '''remember to return an mark '''it Accepted.''