Hello from Rio de Janeiro, Brasil!
I’ve been checking some of my older equipments and noticed in my 40D that the small rubber door for the DC power adapter cable (on the inner bottom of the grip of the body, around where the pinky would rest) close to the battery door, was completely dried out and dissolving into particles…
I decided to take it off but can’t find a replacement for it. The ones I’ve found that looks more similar are for 5d/5dII, for 60/70D, and for the 7D, but I don’t know if any of these would really fit well in the 40… the are just rectangular and looking more alike than the other models do. The service and parts manual of any of these cameras talk about this little rubber door.
Next is the picture of what’s left from it trying to see if the numbers would point me to any direction…
[image|3118044]
And this is from the parts manual where it is located:
[image|3118045]
Another tip that I would appreciate is what needs to be disassembled to reinstall the part if I find one… I’ve been observing and maybe the bottom plate is the piece I need to pull of, but maybe I need to follow a determined order to get the bottom plate of…
Thank you very much for any help!
Hello from Rio de Janeiro, Brasil!
I’ve been checking some of my older equipments and noticed in my 40D that the small rubber door for the DC power adapter cable (on the inner bottom of the grip of the body, around where the pinky would rest) close to the battery door, was completely dried out and dissolving into particles…
I decided to take it off but can’t find a replacement for it. The ones I’ve found that looks more similar are for 5d/5dII, for 60/70D, and for the 7D, but I don’t know if any of these would really fit well in the 40… the are just rectangular and looking more alike than the other models do. The service and parts manual of any of these cameras talk about this little rubber door.
Next is the picture of what’s left from it trying to see if the numbers would point me to any direction…
[image|3118044]
And this is from the parts manual where it is located:
[image|3118045]
Another tip that I would appreciate is what needs to be disassembled to reinstall the part if I find one… I’ve been observing and maybe the bottom plate is the piece I need to pull of, but maybe I need to follow a determined order to get the bottom plate of…
Thank you very much for any help!
I’ve been checking some of my older equipments and noticed in my 40D that the small rubber door for the DC power adapter cable (on the inner bottom of the grip of the body, around where the pinky would rest) close to the battery door, was completely dried out and dissolving into particles…
I decided to take it off but can’t find a replacement for it. The ones I’ve found that looks more similar are for 5d/5dII, for 60/70D, and for the 7D, but I don’t know if any of these would really fit well in the 40… the are just rectangular and looking more alike than the other models do. The service and parts manual of any of these cameras talk about this little rubber door.
+
Next is the picture of what’s left from it trying to see if the numbers would point me to any direction…
+
[image|3118044]
+
+
And this is from the parts manual where it is located:
[image|3118045]
Another tip that I would appreciate is what needs to be disassembled to reinstall the part if I find one… I’ve been observing and maybe the bottom plate is the piece I need to pull of, but maybe I need to follow a determined order to get the bottom plate of…
I’ve been checking some of my older equipments and noticed in my 40D that the small rubber door for the DC power adapter cable (on the inner bottom of the grip of the body, around where the pinky would rest) close to the battery door, was completely dried out and dissolving into particles…
I decided to take it off but can’t find a replacement for it. The ones I’ve found that looks more similar are for 5d/5dII, for 60/70D, and for the 7D, but I don’t know if any of these would really fit well in the 40… the are just rectangular and looking more alike than the other models do. The service and parts manual of any of these cameras talk about this little rubber door.
+
+
[image|3118044]
+
+
[image|3118045]
Another tip that I would appreciate is what needs to be disassembled to reinstall the part if I find one… I’ve been observing and maybe the bottom plate is the piece I need to pull of, but maybe I need to follow a determined order to get the bottom plate of…
Hello from Rio de Janeiro, Brasil!
I’ve been checking some of my older equipments and noticed in my 40D that the small rubber door for the DC power adapter cable (on the inner bottom of the grip of the body, around where the pinky would rest) close to the battery door, was completely dried out and dissolving into particles…
I decided to take it off but can’t find a replacement for it. The ones I’ve found that looks more similar are for 5d/5dII, for 60/70D, and for the 7D, but I don’t know if any of these would really fit well in the 40… the are just rectangular and looking more alike than the other models do. The service and parts manual of any of these cameras talk about this little rubber door.
Another tip that I would appreciate is what needs to be disassembled to reinstall the part if I find one… I’ve been observing and maybe the bottom plate is the piece I need to pull of, but maybe I need to follow a determined order to get the bottom plate of…
Thank you very much for any help!