How to flash firmware with no picture after replacing TCON board
Texte:
My LCD TV suddenly stopped showing any picture, not even the on screen menus. Audio ok, power ok, Backlight working.
# i checked power (12v and 5V) at various places on the 3 boards and its OK
# service manual said tcon board is most likely failure
# installed a new TCON board and downloaded the latest firmware from SOny on usb drive and trying to flash it
I was told to insert the usb drive with TV UNPLUGGED. then PLUG IN TV. firmware should automatically install and indicator light should blink white during the process of perhaps 1/2 hour and then TV would turn on
BUT i dont see indicator light blink. USB stick blinked at first but 45min later, nothing happening. any help would be appreciated !