iOpener

iOpener

$19.95

$19.95

Nous vous enverrons un message lorsque le produit sera à nouveau disponible.

Détails du produit

Caractéristiques

Caractéristiques

Put the heat right where you need it!

  • A simpler and safer way to open a glue-laden device.
  • Heated in a microwave, the iOpener softens adhesive.
  • This kit is designed to service every generation of Apple iPad, but can also be used for many more devices.

Kit Contents:

  • iOpener
  • iFixit Opening Picks set of 6
  • Small Suction Cup
  • Tweezers
  • Plastic Cards
  • Spudger
  • Anti-Static Project Tray
  • Double-ended Opening Tool
  • Phillips #000, Phillips #00, Phillips #0, Torx T5, Sim Eject, and Magnetic Pickup screwdriver bits and Black 4mm Screwdriver Handle

Vidéo du produit

Histoires de réparations

Avatar de l'utilisateur
Jaden's Story Photo #1096219
Avatar de l'utilisateur
bjmnet's Story Photo #1061183

Mon problème

My friend had ruined his screen but didn't have his contacts backed up to the cloud. Over 800 contacts compiled over several years would have been lost had we not been able to get a new screen to get the phone up and running. Installed a new screen and uploaded all of his contacts!

Ma solution

It went great. I . . .

Avatar de l'utilisateur

Mon problème

Battery got worn out.

Ma solution

Replaced the battery with the one I ordered from iFixit. Couldn't pull the glue strips from under the battery, they tore off. Otherwise, all good.

Mon conseil

Recommend ordering iOpener kit for 5C or 6 and above, because pulling the glue strips out is tricky. They can easily tear off, in whi . . .

Avatar de l'utilisateur
Avatar de l'utilisateur

Mon problème

Cracked display screen.

Ma solution

Very easy with the iOpener to get the iPad open, which is the bulk of the time of the repair. Worked great and everything else was easy following the guides.

Mon conseil

I usually like to put my adhesive strips on the replacement panel and then use the iOpener to soften the adhesive and th . . .

Avatar de l'utilisateur

Mon problème

Dead battery after water spill.

Ma solution

So,so,so. My battery went dead after a water spill on my MacBook Pro 13 retina early 2015 version. Following the instructions on iFixit , I got the battery changed and Laptop turned ON but.......... a message came that it could not detect the keyboard. Apparently, du . . .

Avatar de l'utilisateur

Mon problème

Phone wasn't holding charge very well and battery would usually die or go to 3% when working out in the cold (I live in Maine).

Ma solution

The repair was easy I think. I watched a video on it before I tore it apart, which I highly recommend. With all the tools that were provided I was able to get the battery ou . . .

Avatar de l'utilisateur

Mon problème

Digitizer on iPad 3 was not working—no touch sensitivity at all.

Ma solution

Bought new digitizer. Opened case with iOpener and guitar picks. Opened latches on ZIF connectors to release ribbon cables of digitizer and LCD screen. When replacing new digitizer ribbon cable, which comes in two parts, one part woul . . .

Avatar de l'utilisateur

Mon problème

Cracked screen

Ma solution

Repair was fine, but initial setup was VERY frustrating, see below.

Mon conseil

Your video says microwave the iopener for 1min, but you have a banner that says newer versions should only be "cooked" for 30sec. The location of that video tag is perfectly hidden by YouTube ads!!!!!!!

Nothing is mess . . .

Avatar de l'utilisateur

Mon problème

Girlfriend spilled water on her macbook. It turned on and worked on AC but once unplugged it turned off. I opened up the laptop and found that the pcb controller on the battery was corroded.

Ma solution

After wrestling the battery out of the case, I plugged in the new battery, turned on the laptop, unplugged the . . .

Voir plus