Fixed LCD on Macbook Pro
Broken LCD w/ verticle bands of solid white/black.
Reasonably well. Used a hair dryer instead of a heat gun. Had a lot of trouble getting LVDS cable (also replaced) to stay in the lcd when putting everything back together.
My LCD panel has about 50 stuck red pixels all in a clump in the lower left corner. This could be because of incorrect installation, but I've done a few of these and never had a problem before. I suspect a bad panel.
I would like to see more guidance on how much heat to apply to the glass, how to secure and route cables (especially lvds), and maybe some videos of the trickier parts of the repair.
T6 Torx Screwdriver
Phillips #00 Screwdriver
Heavy-Duty Suction Cups (Pair)
P6 Pentalobe Screwdriver 2009 15" MacBook Pro Battery
MacBook Pro 15" Unibody (Late 2008 - Late 2011) LCD Panel