Aller au contenu principal

Ce dont vous avez besoin

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Apple Universal Dock Model A1256, utilisez notre manuel de réparation.

  1. Apple Universal Dock Model A1256 Teardown, Apple Universal Dock Model A1256 Teardown: étape 1, image 1 de 1
    • Pry along the edge of the bottom of the case. It will just pop out.

  2. Apple Universal Dock Model A1256 Teardown: étape 2, image 1 de 1
    • Remove the top case from the bottom.

  3. Apple Universal Dock Model A1256 Teardown: étape 3, image 1 de 1
    • There are five Phillips screws holding the metal brace down (In the picture I have already removed them).

  4. Apple Universal Dock Model A1256 Teardown: étape 4, image 1 de 2 Apple Universal Dock Model A1256 Teardown: étape 4, image 2 de 2
    • The brace is glued in near the ir-sensor. You may have to apply a little bit force to remove it, but it will come out with just pulling. (You can pry it a little bit with a spudger or a screwdriver)

  5. Apple Universal Dock Model A1256 Teardown: étape 5, image 1 de 2 Apple Universal Dock Model A1256 Teardown: étape 5, image 2 de 2
    • The only major chip located on the circuit board. (All those who have wondered about the dock's line out, I think we are clear now.)

Devilac

Membre depuis le 06/23/10

67 Réputation

1 tutoriel rédigé

Un commentaire

Can the actual dock insert (the section the iPod would clot on top of) be used in an Apple iPod HiFi repair? (see repair article Remplacement des insertion iPad dock du Apple iPod Hi-Fi)

Harrison C - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 11

30 derniers jours : 47

Total : 24,606