Outils recommandés dans ce démontage

Vidéo d'introduction

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Motorola Moto G 2nd Generation, utilisez notre manuel de réparation.

Remove back cover. It's easy, no adhesive and no screws. Remove back cover. It's easy, no adhesive and no screws.
  • Remove back cover. It's easy, no adhesive and no screws.

Also remove the SIM and SDCard!

Ben Low - Réponse

Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions. Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions. Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions.
  • Twist off all 14 screws together and remove the back frame easily. But the screws feature different lengths, you'd better remember their positions.

"You'd better remember their positions" Can't you make full guides on all your devices?

Glaceau Clara - Réponse

Hi there! This is a teardown, not a repair guide, check the full manual to see more complete guides, here for instance is a detailed screw removal step.

Sam Lionheart -

Just for completion as I made the same mistake today.

The longer screws are at the top and the bottom (2x4 screws) and the shorter ones (2x3) at the left and right side of the case.

Took me some time to find out which one goes to which position.

Sebastian Schwägerl - Réponse

Take away the volume button and power button. Take away the volume button and power button.
  • Take away the volume button and power button.

Ajouter un commentaire

Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive. Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive. Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive.
  • Release SIM&SD card reader connector and battery connector. And get the vibrator motor free from adhesive.

Can u explain little detailed about this step. Unable to release sim connector.

Goutham Ram - Réponse

Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery. Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery. Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery.
  • Loosen the platinum foil under SIM & SD card reader from plate. And then drag the stickers out which fix the battery.

Ajouter un commentaire

At that time, remove the battery with SIM & SD card reader assembly together.
  • At that time, remove the battery with SIM & SD card reader assembly together.

Ajouter un commentaire

Separate battery and SIM & SD card reader assembly. Separate battery and SIM & SD card reader assembly. Separate battery and SIM & SD card reader assembly.
  • Separate battery and SIM & SD card reader assembly.

Ajouter un commentaire

Release LCD screen connector from motherboard. Release LCD screen connector from motherboard. Release LCD screen connector from motherboard.
  • Release LCD screen connector from motherboard.

Ajouter un commentaire

Release sensor flex connector and front camera connector respectively. Release sensor flex connector and front camera connector respectively.
  • Release sensor flex connector and front camera connector respectively.

Ajouter un commentaire

Remove screws on the motherboard and the motherboard can be removed easily. Remove screws on the motherboard and the motherboard can be removed easily. Remove screws on the motherboard and the motherboard can be removed easily.
  • Remove screws on the motherboard and the motherboard can be removed easily.

Ajouter un commentaire

Remove rear camera. Remove rear camera. Remove rear camera.
  • Remove rear camera.

Ajouter un commentaire

Remove front camera and sensor cable. Remove front camera and sensor cable. Remove front camera and sensor cable.
  • Remove front camera and sensor cable.

Ajouter un commentaire

Remove earpiece and loudspeaker. Remove earpiece and loudspeaker.
  • Remove earpiece and loudspeaker.

Ajouter un commentaire

Done.
  • Done.

Ajouter un commentaire

Sophia

Membre depuis le 25/03/2014

39 755 Réputation

107 tutoriels rédigés

13 commentaires

Nice work!

REQUEST: Next time you do a cell phone would you also shoot a straight down on top shot. The 3/4 is nice but I want to look straight down !

TY

Top View - Réponse

P.S. Or just do a single TOP VIEW at the END like this one from Dillon ! Pretty Please!

T-Mobile Huawei Prism U8651T Teardown

Top View -

Can anyone please tell me where I can get the details of the Antenna used for the GSM connection in this phone? Like the drawing or schematic.

Please I really need this as this phone has poor cell reception.

Amol - Réponse

My Moto G just burned with 12 V from a cheap auto-recharger. But I lost very important data on the 8 GB memory. Is there a possible way to save the data?

mihaibanditu - Réponse

Where can I get more information about GPS module and its antenna?

Paulo Abner - Réponse

how to remove the external HDD? is there any way to recover data from it after detaching it from the device?

Atul Mohan - Réponse

Give mi a seting

Ashish Barvhan - Réponse

Mala motoG2 chi purn settings pahije

Ashish Barvhan - Réponse

Can not remove the LCD?

jm2k7 - Réponse

tanto el auricular y el altavoz son iguales si se invierte de posicion

Jorge Laura - Réponse

what is issue if the moto g2 phone is heating at corner of near selfie camera when put for charging..

Mak Fighter - Réponse

must be reply for my question…

Mak Fighter - Réponse

what’s that small ribbon (looks like a thumbs up) coming out in image on step 13. I recently replaced a screen on my motog 2g and found this ribbon lying below battery but didnt know what to do with it. It is not a connector for sure as there are no sockets to connect there. my phone is working fine without my doing anything with that connector. just curious what it is for.

pradeep - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 14

7 derniers jours : 87

30 derniers jours : 384

Total : 47,096