Outils recommandés dans ce démontage

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Pentax Optio WG-1 GPS, utilisez notre manuel de réparation.

Clean the device. You are able to rinse with under running water. It is recommended to ensure that you remove the battery and memory card before working with the device.
  • Clean the device. You are able to rinse with under running water. It is recommended to ensure that you remove the battery and memory card before working with the device.

  • Prepare a clean workstation and have your tool(s) ready.

Ajouter un commentaire

Remove 4 Phillips 1/4 inch 00 screws around the border of the display with the screwdriver. Remove 4 Phillips 1/4 inch 00 screws around the border of the display with the screwdriver. Remove 4 Phillips 1/4 inch 00 screws around the border of the display with the screwdriver.
  • Remove 4 Phillips 1/4 inch 00 screws around the border of the display with the screwdriver.

Ajouter un commentaire

Remove the black rubber adhesive around the border of the device by peeling slowly. Remove the black rubber adhesive around the border of the device by peeling slowly. Remove the black rubber adhesive around the border of the device by peeling slowly.
  • Remove the black rubber adhesive around the border of the device by peeling slowly.

Ajouter un commentaire

Remove 2 Phillips 00 1/4 inch rubber sealed screws off the top of the camera. Remove 2 Phillips 00 1/4 inch rubber sealed screws off the top of the camera.
  • Remove 2 Phillips 00 1/4 inch rubber sealed screws off the top of the camera.

Ajouter un commentaire

Remove the display screen from the casing. When opening, the micro USB cover and the battery cover will fall out with a pin. Remove the display screen from the casing. When opening, the micro USB cover and the battery cover will fall out with a pin. Remove the display screen from the casing. When opening, the micro USB cover and the battery cover will fall out with a pin.
  • Remove the display screen from the casing. When opening, the micro USB cover and the battery cover will fall out with a pin.

Ajouter un commentaire

Remove all orange strips located on the motherboard and the LCD screen. Lift black latches before removing the strips. Lift black latches before removing the strips.
  • Remove all orange strips located on the motherboard and the LCD screen.

  • Lift black latches before removing the strips.

Ajouter un commentaire

Remove the lens from the camera carefully. It is the black block held inside the casing. Remove the lens from the camera carefully. It is the black block held inside the casing. Remove the lens from the camera carefully. It is the black block held inside the casing.
  • Remove the lens from the camera carefully. It is the black block held inside the casing.

Ajouter un commentaire

Remove 3 Phillips 00 screws from the motherboard.
  • Remove 3 Phillips 00 screws from the motherboard.

Ajouter un commentaire

Remove 2 Phillips 00 screws from the mini USB bay. Remove 2 Phillips 00 screws from the mini USB bay. Remove 2 Phillips 00 screws from the mini USB bay.
  • Remove 2 Phillips 00 screws from the mini USB bay.

Ajouter un commentaire

Remove 2 Phillips 00 screws from the silver handle on the side of the camera.
  • Remove 2 Phillips 00 screws from the silver handle on the side of the camera.

Ajouter un commentaire

Remove 3 Phillips 00 screws from the camera's photo capture button.
  • Remove 3 Phillips 00 screws from the camera's photo capture button.

  • After removing those screws, remove the plastic piece and buttons they secure.

Ajouter un commentaire

Remove 3 Phillips 00 screws from the same location located under the cameras photo capture button.
  • Remove 3 Phillips 00 screws from the same location located under the cameras photo capture button.

Ajouter un commentaire

Remove the motherboard from the housing. Remove the motherboard from the housing. Remove the motherboard from the housing.
  • Remove the motherboard from the housing.

Ajouter un commentaire

Brandon Berlew

Membre depuis le 27/01/2015

122 Réputation

1 tutoriel rédigé

Équipe

Pasco Hernando, Team 1-3, Prince Winter 2015 Membre de l'équipe Pasco Hernando, Team 1-3, Prince Winter 2015

PHSC-PRINCE-W15S1G3

6 membres

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 40

Total : 2,105