Outils recommandés dans ce démontage

Introduction

This is a teardown of the RIM Blackberry.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre BlackBerry 7290, utilisez notre manuel de réparation.

With your index finger, press down on the lock button to unlock the battery cover. Slide the battery cover down towards you to reveal the battery. Slide the battery cover down towards you to reveal the battery.
  • With your index finger, press down on the lock button to unlock the battery cover.

  • Slide the battery cover down towards you to reveal the battery.

Ajouter un commentaire

Use your index finger to lift and remove the battery from the phone. Use your index finger to lift and remove the battery from the phone. Use your index finger to lift and remove the battery from the phone.
  • Use your index finger to lift and remove the battery from the phone.

Ajouter un commentaire

Slide the SIM card holder to the left to unlock the SIM card.
  • Slide the SIM card holder to the left to unlock the SIM card.

Ajouter un commentaire

Lift the SIM card holder up. Gently remove the SIM card from the SIM card holder.
  • Lift the SIM card holder up.

  • Gently remove the SIM card from the SIM card holder.

Ajouter un commentaire

Remove the four top screws using a T-6 torx screwdriver.
  • Remove the four top screws using a T-6 torx screwdriver.

  • The top four screws are .413 inches.

Ajouter un commentaire

Remove the two bottom screws using a T-6 torx screwdriver. The bottom two screws are .2 inches in length.
  • Remove the two bottom screws using a T-6 torx screwdriver.

  • The bottom two screws are .2 inches in length.

  • The second picture displays the device after the six screws have been removed.

Ajouter un commentaire

Use the plastic opening tool to apply pressure on the two clips that are located at the bottom of the phone.
  • Use the plastic opening tool to apply pressure on the two clips that are located at the bottom of the phone.

Ajouter un commentaire

With both of the bottom clips unhooked, lift the bottom portion of the phone and slide it upwards (towards your fingers) to detach the back cover from the front cover. With both of the bottom clips unhooked, lift the bottom portion of the phone and slide it upwards (towards your fingers) to detach the back cover from the front cover. With both of the bottom clips unhooked, lift the bottom portion of the phone and slide it upwards (towards your fingers) to detach the back cover from the front cover.
  • With both of the bottom clips unhooked, lift the bottom portion of the phone and slide it upwards (towards your fingers) to detach the back cover from the front cover.

Ajouter un commentaire

Using a T-6 screwdriver, remove the screw located on top of the phone. After the screw has been removed, carefully lift the side button brace to reveal the side button.
  • Using a T-6 screwdriver, remove the screw located on top of the phone.

  • After the screw has been removed, carefully lift the side button brace to reveal the side button.

Ajouter un commentaire

To remove the logic board mounting plate, start by loosening one side of the phone.
  • To remove the logic board mounting plate, start by loosening one side of the phone.

Ajouter un commentaire

With one side loosened, simply lift the logic board mounting plate off of the phone's front cover.
  • With one side loosened, simply lift the logic board mounting plate off of the phone's front cover.

Ajouter un commentaire

Turn the logic board mounting plate over to reveal the LCD display.
  • Turn the logic board mounting plate over to reveal the LCD display.

Ajouter un commentaire

Peel off the rubber keypad buttons from the face plate. Peel off the rubber keypad buttons from the face plate.
  • Peel off the rubber keypad buttons from the face plate.

Ajouter un commentaire

Use a plastic opening tool to unhook the LCD display from the logic board mounting plate.
  • Use a plastic opening tool to unhook the LCD display from the logic board mounting plate.

Ajouter un commentaire

With the clip unhooked, gently pull off the LCD display from the phone. With the clip unhooked, gently pull off the LCD display from the phone.
  • With the clip unhooked, gently pull off the LCD display from the phone.

Ajouter un commentaire

Remove the the three screws that are highlighted in red using a T6 torx screwdriver. The screw is .2 inches in length.
  • Remove the the three screws that are highlighted in red using a T6 torx screwdriver.

  • The screw is .2 inches in length.

Ajouter un commentaire

Remove the screw using a T6 torx screwdriver
  • Remove the screw using a T6 torx screwdriver

  • The screw is .2 inches in length.

Ajouter un commentaire

Separate the logic board mounting plate from the logic board. Separate the logic board mounting plate from the logic board.
  • Separate the logic board mounting plate from the logic board.

Ajouter un commentaire

These are all the components of the phone. These are all the components of the phone.
  • These are all the components of the phone.

Ajouter un commentaire

kenny34

Membre depuis le 28/10/2009

69 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 19-6, Maness Fall 2009 Membre de l'équipe Cal Poly, Team 19-6, Maness Fall 2009

CPSU-MANESS-F09S19G6

5 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 3

Total : 5,885