Outils recommandés dans ce démontage

Introduction

I'm going to dissect an old friend, my first disc player. It is hoped that this teardown, while exposing the hydro-suspension and green-amber lighting, will reveal an awesomeness worthy of a Sony PS3 Slim (Gadget Lab Contest).

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Sony D-822K Car Discman, utilisez notre manuel de réparation.

Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.
  • Obtain a D822-K Discman and remote. True, it has DSP and Surround Sound, but the 90's have come and gone. It's okay to take it apart.

My gosh until now I totally forgot about this player, I had the exact same one for years !

Below - Réponse

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

IanMaffett - Réponse

Quote from IanMaffett:

Wow - this was my first player, too. Expensive little thing... I forgot about the luminance until you mentioned it - I loved the green.

It was expensive, wasn't it? I was expecting a little more sophistication in the suspension for the price.

modem21 - Réponse

Oh, last week I found that missing illumination switch. When I put in, I'll try to fix the whining sound from the headphone output.

modem21 - Réponse

Position unit so that the bottom is facing up. Remove the 6 screws.
  • Position unit so that the bottom is facing up. Remove the 6 screws.

  • Hold top and bottom of unit together as you turn the unit over, bottom facing down. Use caution; the upper and lower case, along with circuit board are now loose.

  • Watch out for the AVLS and illumination switches, they love to disappear when unsupervised. Remove top of case.

Ajouter un commentaire

Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader. Slide edge of ribbon cable connector towards ribbon cable to disengage. Unplug the red, white, and blue plugs from the circuit board.
  • Removing the CD reader: Gently pull all 3 rubber grommets sideways, away from the CD reader.

  • Slide edge of ribbon cable connector towards ribbon cable to disengage.

  • Unplug the red, white, and blue plugs from the circuit board.

Ajouter un commentaire

Kits RAM pour Mac
Accélérez votre Mac. Maximisez sa mémoire.
Kits RAM pour Mac
Augmentez la mémoire de votre Mac.
Observation: This is the Hydro Suspension system...really. Observation: This is the Hydro Suspension system...really.
  • Observation: This is the Hydro Suspension system...really.

Ajouter un commentaire

Remove circuit board Notice the dual-color light modules. (I temporarily connected the power to show off the lights) Notice the dual-color light modules. (I temporarily connected the power to show off the lights)
  • Remove circuit board

  • Notice the dual-color light modules. (I temporarily connected the power to show off the lights)

Ajouter un commentaire

Disconnect tailpiece, and power supply.
  • Disconnect tailpiece, and power supply.

Ajouter un commentaire

Remote: Remove the 3 screws from the bottom. Pull apart. The function buttons have a neat overlay design.
  • Remote: Remove the 3 screws from the bottom. Pull apart.

  • The function buttons have a neat overlay design.

Ajouter un commentaire

Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?
  • Completely disassembled. The illumination button was lost for two weeks after reassembling... but who uses amber lights anymore?

Ajouter un commentaire

modem21

Membre depuis le 09/10/2009

84 Réputation

1 tutoriel rédigé

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 8

Total : 16,423