Aller au contenu principal

Introduction

Removing the brake caliper from the rotor is a necessary step for many repairs and modifications.

Outils

Pièces

Aucune pièce spécifiée.

  1. Use a 15 mm box end wrench to remove the two bolts on the back of the brake caliper. Use a 15 mm box end wrench to remove the two bolts on the back of the brake caliper.
    • Use a 15 mm box end wrench to remove the two bolts on the back of the brake caliper.

  2. Lift the brake caliper off the rotor and set it aside. Place the caliper on some type of support so that you do not put too much strain on the brake hose.
    • Lift the brake caliper off the rotor and set it aside.

    • Place the caliper on some type of support so that you do not put too much strain on the brake hose.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Hodson

Membre depuis le 13/04/2010

145 066 Réputation

127 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 305