Introduction
A how to guide on replacing the steering wheel on a 1988-1994 Nissan Model 240SX.
Ce dont vous avez besoin
-
-
-
Place the puller tool on the wheel aligning the steering shaft with the press head and the two threaded holes in the steering wheel with the holes in the ears of the puller.
-
Run the bolts, from the puller tool, through the holes in the ears and thread them into the steering wheel hand tight.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.