Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 1, image 1 de 1
    • Find the hood lever, this is normally under the dash, to the left of the steering wheel.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 2, image 1 de 1
    • Pull the lever and the hood will pop up.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 3, image 1 de 1
    • Go to the front of the car and push the lever up to unlatch the hood, you may need to feel around for a minute to find this.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 4, image 1 de 1
    • Find the battery, this is normally to the left front of the engine.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 5, image 1 de 1
    • Once you have found the battery. It is time to unscrew the bolts holding in the wires.

    • The red circle is positive and the black circle is the negative.

    • If you see battery acid on the terminal bolts remove this be using baking soda mixed with water and a tooth brush.

  6. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 6, image 1 de 1
    • With your 8mm wrench remove the negative terminal bolt.

    • Make sure the negative and positive terminals do not touch!

  7. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 7, image 1 de 1
    • Now with your 15mm wrench remove the positive terminal bolt, the same way you removed the negative terminal bolt.

    • Make sure the negative and positive terminals do not touch!

  8. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 8, image 1 de 2 : étape 8, image 2 de 2
    • With your 13mm socket, remove the bolt that holds the block, that holds the battery in. This bolt will not come out completely. Once you feel slack in the bolt you may remove the whole block.

    • Make sure you do not touch the positive and negative terminals, you might get shocked!

  9. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 9, image 1 de 1
    • Now lift out the battery using the handle shown.

    • To recycle your old battery take it back to the store where you bought the new battery.

  10. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 10, image 1 de 1
    • To install the new battery follow these steps in reverse order from step 8-5.

    • When putting the battery bolts back in, make sure you put the negative bolt in first and then the positive bolt in second.

Ligne d'arrivée

6 autres ont terminé cette réparation.

Vaughn Higginbotham

Membre depuis le 04/17/14

1 221 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 24

Total : 6,250