Réparez vos affaires Communauté Boutique

1997-2006 Jeep Wrangler (TJ) Headlight Replacement

Introduction

With enough time, any lightbulb will burn out, and headlights are no different.

This guide demonstrates how to change a headlight in a 1997-2006 Jeep Wrangler. As opposed to many vehicles, the entire headlight assembly for this model must be replaced, not just the bulb. This guide will aid in disassembly and reassembly of the external and internal headlight bracket.

This is a straight forward process, requiring basic tools and less than an hour of your time.

Ensure that your vehicle is turned off and the emergency brake is engaged before beginning the repair.

Ce dont vous avez besoin

  1. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement, Headlight: étape 1, image 1 de 1

    • Unclasp and prop up the hood.

    Modifier

  2. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 2, image 1 de 1

    • Remove the three 15.9 mm screws around the external ring casing with a Phillips #0 screwdriver.

    Modifier

  3. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 3, image 1 de 1

    • Pull out the external ring casing.

    Modifier

  4. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 4, image 1 de 2 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 4, image 2 de 2

    • Remove the four screws securing the internal ring casing with a T15 Torx screwdriver.

    Modifier

  6. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 5, image 1 de 1

    • Disconnect the headlight assembly from the vehicle by pulling the connector directly out of the back port.

    Modifier

  7. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 6, image 1 de 1

    • Realign the internal bracket to match the screw holes.

    Modifier

  8. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 7, image 1 de 1

    • Reinstall the four screws securing the internal ring casing with a T15 Torx screwdriver.

    Modifier

  9. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 8, image 1 de 1

    • Realign the external bracket to match the screw holes.

    Modifier

  10. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 9, image 1 de 1

    • Replace the three 15.9 mm screws using a Phillips #0 screwdriver.

    Modifier

  11. 1997-2006 Jeep Wrangler (TJ) Headlight Replacement: étape 10, image 1 de 1

    • Close and clasp the hood back to its original position.

    Modifier
Conclusion

Enjoy your bright new headlight(s)!

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Troy Taylor

Membre depuis le 02/28/22

199 Réputation

1 tutoriel rédigé

Badges: 4

+ 1 badge de plus

Équipe

University of Memphis, Team 2-10, Willis Spring 2022 Membre de l'équipe University of Memphis, Team 2-10, Willis Spring 2022

UM-WILLIS-S22S2G10

1 membre

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 26

30 derniers jours : 95

Total : 3,277