Aucun outil requis.


Prop up your hood.
  • Prop up your hood.

  • Make sure you prop your hood up with your hood prop rod.

Ajouter un commentaire

Locate the back of the headlight you plan to replace the bulb in.
  • Locate the back of the headlight you plan to replace the bulb in.

    • This will be directly behind the headlight assembly.

  • If you are replacing your left headlight, you may need to remove the battery to have enough room to do this replacement.

Ajouter un commentaire

  • Disconnect the headlight.

Ajouter un commentaire

  • Remove the rubber cover by pulling on the tab marked "Pull Top" away from you.

Ajouter un commentaire

  • Release the bulb by pushing the metal fastener inward and then moving it upwards.

Ajouter un commentaire

  • Remove the bulb.

Ajouter un commentaire

  • Insert the new bulb. Make sure the metal tabs fit correctly.

  • I've read that touching the glass on the bulb can shorten the life of the bulb, so try not to do that.

Ajouter un commentaire


To finish your headlight bulb replacement, follow these instructions in reverse order.

12 autre(s) ont terminé cette réparation.

Chris Opperwall

Membre depuis le 04/04/2013

1 062 Réputation

1 tutoriel rédigé

The 2000 and 2001 Camry models take 9006 (HB4) bulbs for the low beams and 9005 (HB3) bulbs for the high beams, rather than the 9003 (HB2) linked here -- at least for the North American models I've looked up.

If you have the original owner's manual that came with the car, there's a table of all the bulb types you'll need for different lights in the "Do-It-Yourself Maintenance" section. It doesn't hurt to double check.

rakslice - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 12

7 derniers jours : 95

30 derniers jours : 449

Total : 29,978