1. Use a #2 Phillips screwdriver to remove the four screws.
    • Use a #2 Phillips screwdriver to remove the four screws.

    Ajouter un commentaire

  2. Remove the rubber gasket from the rain tray.
    • Remove the rubber gasket from the rain tray.

    Ajouter un commentaire

    • Lift the tray upwards and away from the vehicle.

    Ajouter un commentaire

    • Use a flathead screwdriver to remove the cap from the windshield wiper.

    Ajouter un commentaire

    • Use a socket wrench to release the passenger-side windshield wiper locking nut.

    Ajouter un commentaire

    • Gently lift up the passenger-side windshield wiper.

    Ajouter un commentaire

    • Remove the driver-side windshield wiper in the same fashion.

    Ajouter un commentaire

    • Lift up the plastic cover.

    Ajouter un commentaire

    • Use an offset Phillips screwdriver to remove a screw in the back of the automatic control unit cover.

    • In a pinch, you can make this tool with a phillips driver bit and end wrench.

    Ajouter un commentaire

    • Use a #2 Phillips screwdriver to remove the front two screws.

    Ajouter un commentaire

    • Gently unplug and lift out the automatic transmission control unit.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Matthew Newsom

Membre depuis le 05/01/2010

31 903 Réputation

67 tutoriels rédigés

Does the new TCU need to be programmed in any way?? Or is it just plug and play.

Paul Newlove - Réponse

does it need to be programmed mine needs replacement my gears are not shifting

dean wafula - Réponse

got a question if your display light is dim what could be the problem

dean wafula - Réponse

Volkswagen tiguan won't start after disconnection, wat can I do to restart it

Jusu Suapay - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 6

7 derniers jours : 46

30 derniers jours : 169

Total : 31,572