Introduction
In this guide, we will be teaching you how to rotate the tires on your Mazda RX-8 04-09. Remember there are lots of sharp metal pieces of a car, so be careful when doing your repairs.
Ce dont vous avez besoin
-
-
-
Loosen lug nuts with the socket/wrench just until they begin to turn.
Demander à FixBot
-
-
-
Place Jack under the car (as shown).
-
Use the Jack Handle to crank up just enough so that the tire noticeably lifts off the ground.
-
-
-
Put the jack stand under the car to ensure the car will not fall back down while you are working on it.
-
-
-
-
With the front wheel off repeat step 4 and step 5 to remove the rear wheel as well.
-
-
-
Place the rear wheel on the front of the car and place the front wheel in the rear. Tighten up the lug nuts and your tire rotation is complete.
-
Begin to tighten the lug nuts as much as you can with the wheel in the air, and then lower the car to the ground to finish tightening.
-
-
Verify a second time that every piece nut is secure and tight. You may have to do this again in the future.
Équipe
Cal Poly, Team 8-4, Regan Spring 2015 Membre de l'équipe Cal Poly, Team 8-4, Regan Spring 2015
CPSU-REGAN-S15S8G4
5 membres
55 tutoriels rédigés
