Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 1, image 1 de 2 : étape 1, image 2 de 2
    • Place wheel ramps in front of the front tires.

    • Carefully drive car onto wheel ramps.

    • Set parking brake and place a wedge between a rear tire to prevent rollback.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 2, image 1 de 3 : étape 2, image 2 de 3 : étape 2, image 3 de 3
    • Gather oil drip pan, oil filter wrench, socket wrench and socket.

    • Locate oil drain plug (as shown in picture) and place oil drip pan under plug.

    • Using the socket wrench and socket, remove the oil drain plug by turning it counterclockwise.

    • Allow oil to drain into oil drip pan for 10-15 minutes.

    • Screw oil drain plug back in until hand tight. Using socket wrench and socket, turn oil drain plug one more full rotation.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 3, image 1 de 2 : étape 3, image 2 de 2
    • Locate the oil filter (as shown in picture) and place oil drip pan underneath.

    • Using oil filter wrench, loosen oil filter. Remove rest of the way by hand. Be careful as filter is full of oil.

    • Allow oil to drip into pan for 5-10 minutes.

    • Lightly coat rubber seal on new filter with fresh oil.

    • Screw on new filter until hand tight.

    • Dispose of used oil at local auto store or repair shop.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    • Pop open hood.

    • Locate the oil fill cap (as shown in picture) and remove.

    • Place funnel into hole and carefully pour four fresh quarts of oil into funnel.

    • Replace oil fill cap and close hood.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    • Remove wedge from rear tires.

    • Disengage parking brake and slowly back off of ramps.

    • Allow car to run for about 5 minutes.

    • Check for any leaks around oil filter and oil drain plug.

    • If any leaks, tighten oil filter or oil drain plug.

Ligne d'arrivée

6 autres ont terminé cette réparation.

UCSBBRADLEYSMR13S1G4

Membre depuis le 07/27/13

160 Réputation

1 tutoriel rédigé

Équipe

UC Santa Barbara, Team 1-4, Bradley Spring 2013 Membre de l'équipe UC Santa Barbara, Team 1-4, Bradley Spring 2013

UCSB-BRADLEY-S13S1G4

1 membre

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 14

30 derniers jours : 43

Total : 30,557