Aller au contenu principal
  1. Cette étape n’est pas traduite. Aidez à la traduire

    Here is a view of the left tail light assembly Open the rear hatch,( or trunk if it is a sedan). On the inside of the assembly are two retaining screws. Remove those both screws are #6x3/4 inch
    • Here is a view of the left tail light assembly

    • Open the rear hatch,( or trunk if it is a sedan). On the inside of the assembly are two retaining screws. Remove those

    • both screws are #6x3/4 inch

  2. Cette étape n’est pas traduite. Aidez à la traduire

    Here is a view of the assembly with the screws removed. Insert some sort of prying tool between the tail light assembly and the body, just below the crease in the body and pry to the rear of the vehicle. a snap will be felt/heard as the plastic stud releases Move the prying tool to above 1 1/2 inch above the bottom of the assembly. Insert it between the assembly and body and gently pry toward the rear of the vehicle. This should free the second stud.
    • Here is a view of the assembly with the screws removed.

    • Insert some sort of prying tool between the tail light assembly and the body, just below the crease in the body and pry to the rear of the vehicle. a snap will be felt/heard as the plastic stud releases

    • Move the prying tool to above 1 1/2 inch above the bottom of the assembly. Insert it between the assembly and body and gently pry toward the rear of the vehicle. This should free the second stud.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    Now just pull the assembly straight back. Avoid pulling the assembly to one side or another, that can snap the plastic studs Locate the burned out bulb. In this case it was the indicator light. Rotate the bulb sockets in a counterclockwise direction.
    • Now just pull the assembly straight back.

    • Avoid pulling the assembly to one side or another, that can snap the plastic studs

    • Locate the burned out bulb. In this case it was the indicator light. Rotate the bulb sockets in a counterclockwise direction.

    • Pull the sockets straight out of the tail light assembly.

Ligne d'arrivée

4 autres ont terminé cette réparation.

oldturkey03

Membre depuis le 29/09/2010

686 006 Réputation

108 tutoriels rédigés

Équipe

Global Fixers Membre de l'équipe Global Fixers

Community

11 membres

174 tutoriels rédigés

2 commentaires

This was a great help thank you!!

Jeffrey Blum - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 32

Total : 7,949