Introduction
This guide is for base model Mazda 3 owners who need to replace their factory OEM door speakers.
Perform this repair while the car is off.
The speaker in this guide is a component speaker, so they do not require any wire cutting or soldering.
Ce dont vous avez besoin
-
-
Pry the door handle cover upwards using a flathead screwdriver.
-
Remove the cover to expose the screw.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.