Aller au contenu principal

2013-2016 Scion FRS (Toyota gt86) Engine Air Filter Replacement

Ce dont vous avez besoin

  1. 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement, Engine Air Filter: étape 1, image 1 de 3 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement, Engine Air Filter: étape 1, image 2 de 3 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement, Engine Air Filter: étape 1, image 3 de 3
    • Pull the handle located near the driver's left leg to unlock the hood.

    • Pull the secondary latch located to the right of the emblem.

    • Prop up the hood.

    • Make sure you're not working in a high wind area, as that might blow the hood backward and damage your vehicle.

  2. 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 2, image 1 de 1
    • Locate the air filter box, which can be found to the front right of the car.

  3. 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 3, image 1 de 3 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 3, image 2 de 3 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 3, image 3 de 3
    • Pull the metal clips up from the top. They will pop out.

  4. 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 4, image 1 de 3 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 4, image 2 de 3 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 4, image 3 de 3
    • Grab the back of the box and pull it towards the top.

    • To pull out the air-filter, simply pull it away from the car and lift up.

  5. 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 5, image 1 de 1
    • Repeat the process in reverse to install the air filter.

    • Make sure that the tabs on the filter are on the bottom.

  6. 2013-2016 Scion FRS (Toyota gt86)  Engine Air Filter Replacement: étape 6, image 1 de 1
    • Line up the little pins on the cover of the box with the base of the box in order to close it.

    • Clip the pins back in and you're done!

Conclusion

Now that the new filter is installed, you're good to go.

Mark Symonenko

Membre depuis le 09/25/18

133 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 26

Total : 2,656