2013-2015 Nissan Altima Low Beam Bulb Replacement (2013, 2014, 2015)

Introduction

In these steps, you will learn how to change a Nissan Altima light bulb the quick and easy way using household tools. Note: wear gloves if need. Fix can get very dirty.

Ce dont vous avez besoin

Étape 1 Low Beam Bulb

2013-2015 Nissan Altima Low Beam Bulb Replacement, Low Beam Bulb: étape 1, image 1 de 2

2013-2015 Nissan Altima Low Beam Bulb Replacement, Low Beam Bulb: étape 1, image 2 de 2

Turn the steering wheel all the way to the left or right to grant access to the fender line. (Or in our case for better display, remove the wheel.)

Modifier

Étape 2

Remove the fender liner using flathead screwdrivers by unscrewing all 3 locations holding fender liner to front bumper.

Modifier

Étape 3

2013-2015 Nissan Altima Low Beam Bulb Replacement: étape 3, image 3 de 3

Now go to the underside of the fender liner and remove the three bolts using the Phillips screwdriver and flathead for the 1 clip.
Use same flathead screwdriver technique for the flathead highlighted in green.

Modifier

Étape 4

2013-2015 Nissan Altima Low Beam Bulb Replacement: étape 4, image 3 de 3

Grab the small hole on the underside of the fender, and carefully pull the panel out.
This allows you to access the rear of the headlight housing.

Modifier

Étape 5

2013-2015 Nissan Altima Low Beam Bulb Replacement: étape 5, image 3 de 3

Turn the lightbulb holder counter clockwise until it is released from the headlight

Modifier

Étape 6

Pull up on the tab on the back of the bulb holder and simultaneously pull the light bulb out.

Modifier

Étape 7

2013-2015 Nissan Altima Low Beam Bulb Replacement: étape 7, image 3 de 3

Replace the lightbulb by putting the new in place of the old one that was just removed.
Remember to insert the new light you must once again lift the tab while simultaneously inserting the new light bulb.

Modifier