Introduction
The gimbal allows for the rotation of an object such as a camera. If your gimbal is experiencing malfunctions such as gimbal overload, lack of rotation, abnormal vibrations, etc., follow this guide to remove the gimbal and replace the part.
Ce dont vous avez besoin
-
-
If your drone is equipped with it, remove the video transmitter.
-
Disconnect all cables from the gimbal.
-
If your drone has neither the gimbal or video transmitter, you can skip this step.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
Cal Poly, Team S7-G5, Regan Winter 2020 Membre de l'équipe Cal Poly, Team S7-G5, Regan Winter 2020
CPSU-REGAN-W20S7G5
5 membres
9 tutoriels rédigés
Un commentaire
Where are the two wires connect to the gimbal one is a ground and the white wire connects to the power, but where?
