Introduction

This repair guide will walk you through the steps to removing and replacing the internal drive component of your APS Tech 101629 CD-Drive. First the external casing will need to be removed.

Pièces

Aucune pièce nécessaire.

Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool.
  • Pry 4 plastic feet off the bottom of the enclosure using the iPod opening tool.

Ajouter un commentaire

Unscrew the four screws previously covered by the feet.
  • Unscrew the four screws previously covered by the feet.

Ajouter un commentaire

  • Flip the device right side up, then gently slide the casing upwards and off the hard drive.

Ajouter un commentaire

  • Flip device upside down again.

  • Gently pry the bottom gray casing away from the device.

Ajouter un commentaire

  • Rotate so back of device is facing you, then gently pry the back casing away.

  • When back casing is removed, the fan will become loose.

Ajouter un commentaire

  • Flip so device is upside down.

  • Remove 4 screws with Phillips #1 screw driver.

    • Be sure to save the washers that seperate the screws from the baseplate for reassembly.

Ajouter un commentaire

  • Slide the internal drive component away from the back of the device.

  • Remove the connections from the back of the internal component in the order of your choosing, we suggest left to right. The connections are:

    • Audio Connection

    • SCSI ID

    • Terminate On

    • SCSI Connection

    • DC Input (power)

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Alexis Weckel

Membre depuis le 11/04/2011

140 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 24-60, Amido Spring 2011 Membre de l'équipe Cal Poly, Team 24-60, Amido Spring 2011

CPSU-AMIDO-S11S24G60

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 2

Total : 877