Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

This is the first step taken in order to fix many of the parts in this device. Be careful to not strip any of the screws.

Pièces

Aucune pièce spécifiée.

  1. Begin by removing the condensation catcher to expose the screw. Pinch the condensation catcher from both sides and pull. Begin by removing the condensation catcher to expose the screw. Pinch the condensation catcher from both sides and pull.
    • Begin by removing the condensation catcher to expose the screw. Pinch the condensation catcher from both sides and pull.

  2. Remove the screw that was behind the condensation catcher using a Phillips head screwdriver, size PH2.
    • Remove the screw that was behind the condensation catcher using a Phillips head screwdriver, size PH2.

  3. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  4. Remove the piece that was held by the screw by pulling out from the top, then pulling up. This will expose the hinges for the lid. Remove the piece that was held by the screw by pulling out from the top, then pulling up. This will expose the hinges for the lid.
    • Remove the piece that was held by the screw by pulling out from the top, then pulling up. This will expose the hinges for the lid.

  5. To remove the hinges, rotate the bottom of the rod upwards, then push inwards to pull them out. Repeat the process for both sides. This will allow the lid to be removed. To remove the hinges, rotate the bottom of the rod upwards, then push inwards to pull them out. Repeat the process for both sides. This will allow the lid to be removed. To remove the hinges, rotate the bottom of the rod upwards, then push inwards to pull them out. Repeat the process for both sides. This will allow the lid to be removed.
    • To remove the hinges, rotate the bottom of the rod upwards, then push inwards to pull them out. Repeat the process for both sides. This will allow the lid to be removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Brandon Nieves

Membre depuis le 04/09/2015

935 Réputation

8 tutoriels rédigés

Équipe

USF Tampa, Team 2-3, Sullivan Fall 2015 Membre de l'équipe USF Tampa, Team 2-3, Sullivan Fall 2015

USFT-SULLIVAN-F15S2G3

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 9

Total : 695