Aller au contenu principal

Introduction

This guide will illustrate the steps involved in replacing the laptop's hard drive. This may be necessary if your computer won't boot or if you run out of space.

Pièces

Aucune pièce spécifiée.

  1. Turn the laptop off and unplug all cables. Flip over so the bottom is facing you.
    • Turn the laptop off and unplug all cables.

    • Flip over so the bottom is facing you.

    • Remove the ten 3mm Torx T5 screws from the bottom cover.

  2. Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open. Run the spudger along the perimeter of the bottom cover to remove.
    • Use a spudger to wedge between the laptop and bottom cover—lift upwards to pry open.

    • Run the spudger along the perimeter of the bottom cover to remove.

  3. Remove two 4mm black Phillips #1 screws from CD/DVD bracket. Remove the single 4mm silver Phillips #1 screw from the bottom of the CD/DVD bracket.
    • Remove two 4mm black Phillips #1 screws from CD/DVD bracket.

    • Remove the single 4mm silver Phillips #1 screw from the bottom of the CD/DVD bracket.

    • Remove the CD/DVD bracket.

  4. Remove the four 4mm silver Phillips #1 screws that are holding the hard drive in place.
    • Remove the four 4mm silver Phillips #1 screws that are holding the hard drive in place.

  5. Lift up and remove the hard drive from the motherboard. Lift up and remove the hard drive from the motherboard.
    • Lift up and remove the hard drive from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Steven Hahn

Membre depuis le 29/01/2018

785 Réputation

6 tutoriels rédigés

Équipe

USF Tampa, Team S5-G1, Passmore Spring 2018 Membre de l'équipe USF Tampa, Team S5-G1, Passmore Spring 2018

USFT-PASSMORE-S18S5G1

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 9

30 derniers jours : 41

Total : 599