Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert the plastic opening tool between the edge of the screen and the back cover.
-
Gently pry them apart. Use hands to pull them apart if necessary.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the three pieces of tape that secure the battery and its wires. Peel gently so you don’t damage any wires.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Disconnect the ribbon from the motherboard by gently pulling with your fingers.
-
Using the opening tools, pry the battery off of the adhesive.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a Phillips #00 screwdriver to remove the three 2.5mm screws that secure the speaker case to the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use tweezers to remove the three pieces of tape that are covering the metal.
-
Insert the metal spudger beneath the speaker case and wedge it upwards to remove speaker case from the device body.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use tweezers to detach the connecter from the motherboard.
-