Introduction

Batteries either get damaged due to electrical or physical damage, or they get old and simply need to be replaced. Therefore, a replacement battery will be needed, which can be purchased, after purchasing a replacement battery follow these steps to replace the old battery.

Remove all 10 crews on the backplate using a Phillips #00 Screwdriver.
  • Remove all 10 crews on the backplate using a Phillips #00 Screwdriver.

  • All 10 screws are 0.55 inches and 20 mm in diameter.

Ajouter un commentaire

Carefully remove the backplate using the plastic opening tool.
  • Carefully remove the backplate using the plastic opening tool.

Ajouter un commentaire

  • Locate the battery near the bottom.

Ajouter un commentaire

  • Next, unplug the battery from the laptop in the upper left side of the battery, using tweezers.

  • Make sure to complete this step with caution, because if the battery is not unplugged, the motherboard may shock you.

Ajouter un commentaire

  • Remove the six screws holding in the battery with a Phillips #0 screwdriver.

  • Once battery is lifted out and removed, proper dispose of the old battery.

  • Each screw is 0.5 cm in length and 0.5 cm in diameter.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Scott Santiago

Membre depuis le 17/10/2017

517 Réputation

5 tutoriels rédigés

Équipe

UMass Dartmouth, Team S1-G1, Simcock Fall 2017 Membre de l'équipe UMass Dartmouth, Team S1-G1, Simcock Fall 2017

UMASSD-SIMCOCK-F17S1G1

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 25

Total : 142